Close 29/64" · Normal 15/32" · Loose 1/2" — nominal + 1/64" / 1/32" / 1/16" to the nearest standard drill (common shop practice).
Hex head (across flats)
5/8"
Socket key (across flats)
3/8"
Close 29/64" · Normal 15/32" · Loose 1/2" — nominal + 1/64" / 1/32" / 1/16" to the nearest standard drill (common shop practice).
Tightening torque estimate
Target preload is 75% of proof load; torque is estimated from T = K · F · d.
Grade / class
Stress area
Preload
Torque
SAE Grade 2
0.1274 in²
5254 lbf
38 lb·ft · 460 lb·in
SAE Grade 5
0.1274 in²
8120 lbf
59 lb·ft · 710 lb·in
SAE Grade 8
0.1274 in²
11463 lbf
84 lb·ft · 1003 lb·in
These figures assume a nut factor of K = 0.20 (dry / as-received steel). K captures thread and head friction and can swing torque by 30% or more — a lubricated joint needs noticeably less. Change the lubrication assumption in the bolt-torque calculator.
What tap drill do I need for 7/16-28 UNEF?
For a 7/16-28 UNEF thread, drill the hole with a Y tap drill (10.26 mm) before tapping. That produces roughly 72% thread engagement, the usual target for a strong, tappable hole. The mating bolt has a major diameter of 11.112 mm and a pitch of 0.907 mm (28 TPI).
To pass a 7/16-28 UNEF bolt through a part rather than thread it, use a clearance hole: Close 29/64" · Normal 15/32" · Loose 1/2" — nominal + 1/64" / 1/32" / 1/16" to the nearest standard drill (common shop practice)..
All values are generated from the standard thread formulas (ISO 68-1 / ASME B1.1) and published standard tables — not hand-entered. See the full reference.