Metric coarse
Tap drill 14 mm for a M16 × 2.0 thread — major Ø 16 mm, pitch 2 mm (12.7 TPI).
Profile
| Designation | M16 × 2.0 |
|---|---|
| Major (outside) diameter | 16 mm · 0.6299" |
| Pitch | 2 mm · 12.7 TPI |
| Pitch diameter | 14.701 mm · 0.5788" |
| Minor diameter (external) | 13.546 mm · 0.5333" |
| Minor diameter (internal) | 13.835 mm · 0.5447" |
| Recommended tap drill | 14 mm · ≈77% thread |
| Clearance hole | Close 17 · Normal 17.5 · Loose 18.5 mm |
| Hex head (across flats) | 24 mm |
| Socket key (across flats) | 14 mm |
ISO 273 clearance holes (fine / medium / coarse).
Target preload is 75% of proof load; torque is estimated from T = K · F · d.
| Grade / class | Stress area | Preload | Torque |
|---|---|---|---|
| Class 8.8 | 156.7 mm² | 68.15 kN | 218.1 N·m |
| Class 10.9 | 156.7 mm² | 97.53 kN | 312.1 N·m |
| Class 12.9 | 156.7 mm² | 113.98 kN | 364.7 N·m |
For a M16 × 2.0 thread, drill the hole with a 14 mm tap drill (14 mm — the standard D − P rule) before tapping. That produces roughly 77% thread engagement, the usual target for a strong, tappable hole. The mating bolt has a major diameter of 16 mm and a pitch of 2 mm (12.7 TPI).
To pass a M16 × 2.0 bolt through a part rather than thread it, use a clearance hole: Close 17 · Normal 17.5 · Loose 18.5 mm.
All values are generated from the standard thread formulas (ISO 68-1 / ASME B1.1) and published standard tables — not hand-entered. See the full reference.
Same diameter
Nearby sizes