Metric coarse

M1.6 × 0.35

Tap drill 1.25 mm for a M1.6 × 0.35 thread — major Ø 1.6 mm, pitch 0.35 mm (72.57 TPI).

Tap-drill calculator Identify a thread

Tap drill

1.25 mm

1.25 mm · ≈77% thread

Profile

Thread form & key diameters

Dimensions

Designation	M1.6 × 0.35
Major (outside) diameter	1.6 mm · 0.063"
Pitch	0.35 mm · 72.57 TPI
Pitch diameter	1.373 mm · 0.054"
Minor diameter (external)	1.171 mm · 0.0461"
Minor diameter (internal)	1.221 mm · 0.0481"
Recommended tap drill	1.25 mm · ≈77% thread
Clearance hole	Close 1.7 · Normal 1.8 · Loose 2 mm

ISO 273 clearance holes (fine / medium / coarse).

What tap drill do I need for M1.6 × 0.35?

For a M1.6 × 0.35 thread, drill the hole with a 1.25 mm tap drill (1.25 mm — the standard D − P rule) before tapping. That produces roughly 77% thread engagement, the usual target for a strong, tappable hole. The mating bolt has a major diameter of 1.6 mm and a pitch of 0.35 mm (72.57 TPI).

To pass a M1.6 × 0.35 bolt through a part rather than thread it, use a clearance hole: Close 1.7 · Normal 1.8 · Loose 2 mm.

All values are generated from the standard thread formulas (ISO 68-1 / ASME B1.1) and published standard tables — not hand-entered. See the full reference.

Nearby sizes

More metric coarse threads

M1.8 × 0.35Tap 1.45 mmØ 1.8 mm · pitch 0.35 mm M1.4 × 0.3Tap 1.1 mmØ 1.4 mm · pitch 0.3 mm M2 × 0.4Tap 1.6 mmØ 2 mm · pitch 0.4 mm M1.2 × 0.25Tap 0.95 mmØ 1.2 mm · pitch 0.25 mm M1 × 0.25Tap 0.75 mmØ 1 mm · pitch 0.25 mm M2.5 × 0.45Tap 2.05 mmØ 2.5 mm · pitch 0.45 mm M3 × 0.5Tap 2.5 mmØ 3 mm · pitch 0.5 mm M3.5 × 0.6Tap 2.9 mmØ 3.5 mm · pitch 0.6 mm