Metric coarse
Tap drill 47 mm for a M52 × 5.0 thread — major Ø 52 mm, pitch 5 mm (5.08 TPI).
Profile
| Designation | M52 × 5.0 |
|---|---|
| Major (outside) diameter | 52 mm · 2.0472" |
| Pitch | 5 mm · 5.08 TPI |
| Pitch diameter | 48.753 mm · 1.9194" |
| Minor diameter (external) | 45.866 mm · 1.8057" |
| Minor diameter (internal) | 46.588 mm · 1.8342" |
| Recommended tap drill | 47 mm · ≈77% thread |
| Clearance hole | Close 54 · Normal 56 · Loose 62 mm |
| Hex head (across flats) | 80 mm |
ISO 273 clearance holes (fine / medium / coarse).
Target preload is 75% of proof load; torque is estimated from T = K · F · d.
| Grade / class | Stress area | Preload | Torque |
|---|---|---|---|
| Class 8.8 | 1757.8 mm² | 764.66 kN | 7952.4 N·m |
| Class 10.9 | 1757.8 mm² | 1094.25 kN | 11380.2 N·m |
| Class 12.9 | 1757.8 mm² | 1278.82 kN | 13299.8 N·m |
For a M52 × 5.0 thread, drill the hole with a 47 mm tap drill (47 mm — the standard D − P rule) before tapping. That produces roughly 77% thread engagement, the usual target for a strong, tappable hole. The mating bolt has a major diameter of 52 mm and a pitch of 5 mm (5.08 TPI).
To pass a M52 × 5.0 bolt through a part rather than thread it, use a clearance hole: Close 54 · Normal 56 · Loose 62 mm.
All values are generated from the standard thread formulas (ISO 68-1 / ASME B1.1) and published standard tables — not hand-entered. See the full reference.
Same diameter
Nearby sizes