Metric fine
Tap drill 52 mm for a M56 × 4.0 thread — major Ø 56 mm, pitch 4 mm (6.35 TPI).
Profile
| Designation | M56 × 4.0 |
|---|---|
| Major (outside) diameter | 56 mm · 2.2047" |
| Pitch | 4 mm · 6.35 TPI |
| Pitch diameter | 53.402 mm · 2.1024" |
| Minor diameter (external) | 51.093 mm · 2.0115" |
| Minor diameter (internal) | 51.67 mm · 2.0343" |
| Recommended tap drill | 52 mm · ≈77% thread |
| Clearance hole | Close 58 · Normal 62 · Loose 66 mm |
| Hex head (across flats) | 85 mm |
ISO 273 clearance holes (fine / medium / coarse).
Target preload is 75% of proof load; torque is estimated from T = K · F · d.
| Grade / class | Stress area | Preload | Torque |
|---|---|---|---|
| Class 8.8 | 2144 mm² | 932.62 kN | 10445.4 N·m |
| Class 10.9 | 2144 mm² | 1334.61 kN | 14947.7 N·m |
| Class 12.9 | 2144 mm² | 1559.73 kN | 17469 N·m |
For a M56 × 4.0 thread, drill the hole with a 52 mm tap drill (52 mm — the standard D − P rule) before tapping. That produces roughly 77% thread engagement, the usual target for a strong, tappable hole. The mating bolt has a major diameter of 56 mm and a pitch of 4 mm (6.35 TPI).
To pass a M56 × 4.0 bolt through a part rather than thread it, use a clearance hole: Close 58 · Normal 62 · Loose 66 mm.
All values are generated from the standard thread formulas (ISO 68-1 / ASME B1.1) and published standard tables — not hand-entered. See the full reference.
Same diameter
Nearby sizes