ASME B36.10M (welded and seamless wrought steel pipe) · DN 350
Outside diameter 14.000" (355.60 mm), wall 0.156" (3.96 mm), inside diameter 13.688" (347.68 mm), 23.09 lb per foot.
| Trade size | NPS 14 · DN 350 |
|---|---|
| Schedule | Schedule 5 · same wall as 5S |
| Standard | ASME B36.10M (welded and seamless wrought steel pipe) |
| Outside diameter | 14.000" · 355.60 mm |
| Wall thickness | 0.156" · 3.96 mm |
| Inside diameter | 13.688" · 347.68 mm |
| Weight, plain end | 23.09 lb/ft · 34.34 kg/m |
Cross-check: the standard plain-end weight formula W = 10.6802 x t x (OD - t) gives 23.07 lb/ft here, 0.1% from the published 23.09 lb/ft. The published figure is the one printed above.
NPS 14 schedule 5 pipe measures 14.000 in (355.60 mm) across the outside with a 0.156 in wall, so the bore is 13.688 in (347.68 mm). That bore gives a flow area of 147.2 in² and holds 7.644 US gallons per foot (94.94 litres per metre). The outside diameter is 89.7 times the wall, and the steel itself has a cross-section of 6.785 in² and weighs 23.09 lb per foot plain end. One trade size up, NPS 16 in the same schedule carries 1.31 times the flow area.
Schedule 10S is the next heavier wall at NPS 14: 0.188 in, 0.032 in thicker, which narrows the bore to 13.624 in and cuts 0.9% from the flow area.
Next trade size up in this schedule: NPS 16 schedule 5, bore 15.670 in.
| Flow area | 147.2 in² |
|---|---|
| Capacity | 7.644 US gal/ft · 94.94 L/m |
| Metal area | 6.785 in² |
| Moment of inertia | 162.6 in⁴ |
| Section modulus | 23.22 in³ |
| Radius of gyration | 4.895 in |
| Outside surface | 3.665 ft² per foot |
Plain geometry of a hollow circle with OD = 14.000 in and ID = 13.688 in: flow area π/4·ID², metal area π/4·(OD² − ID²), moment of inertia π/64·(OD⁴ − ID⁴), section modulus I ÷ (OD/2), radius of gyration √(I ÷ metal area), capacity flow area × 12 ÷ 231 (231 in³ to the US gallon). Nominal dimensions, so mill tolerance and corrosion allowance are not included.
Nominal Pipe Size is a label, not a measurement. NPS 14 pipe has an outside diameter of 14.000 inches, and it keeps that outside diameter in every schedule made. What the schedule number changes is the wall: at schedule 5 the wall is 0.156 inches, so the bore comes out at 13.688 inches.
That is the practical consequence. Fittings, flanges, supports and threading dies are sized to the outside diameter, so they fit any schedule of the same trade size. Flow, pressure drop and anything that has to pass through the pipe depend on the inside diameter, which changes with every schedule. Order by trade size and schedule; work your hydraulics from the bore.
Same outside diameter of 14.000 inches throughout - only the wall and the bore move.
| Schedule | Wall (in) | ID (in) | Weight (lb/ft) |
|---|---|---|---|
| Schedule 10 | 0.250 | 13.500 | 36.75 |
| Schedule 20 | 0.312 | 13.376 | 45.65 |
| Schedule 40 | 0.438 | 13.124 | 63.50 |
| Schedule 60 | 0.594 | 12.812 | 85.13 |
| Schedule 80 | 0.750 | 12.500 | 106.23 |
| Schedule 100 | 0.938 | 12.124 | 130.98 |
| Schedule 120 | 1.094 | 11.812 | 150.93 |
| Schedule 140 | 1.250 | 11.500 | 170.37 |
| Schedule 160 | 1.406 | 11.188 | 189.29 |
| Standard wall (STD) · 30, 40S | 0.375 | 13.250 | 54.62 |
| Extra strong (XS) · 80S | 0.500 | 13.000 | 72.09 |
| Schedule 10S | 0.188 | 13.624 | not published |
0.156 inches (3.96 mm). The outside diameter is 14.000 inches (355.60 mm) whatever the schedule, so this wall leaves an inside diameter of 13.688 inches.
13.688 inches (347.68 mm). Inside diameter is outside diameter minus twice the wall: 14.000 - 2 x 0.156 = 13.688 inches.
No. NPS 14 is a trade size, not a measurement. The pipe measures 14.000 inches across the outside and 13.688 inches across the bore in this schedule. Only the outside diameter is fixed across schedules.
23.09 pounds per foot plain end (34.34 kg per metre), for carbon steel. The figure excludes coatings, linings and fittings.
Yes, at NPS 14. 5S is the same 0.156 inch wall here. That coincidence is per size and does not hold everywhere: standard wall and schedule 40 part company above NPS 10, and extra strong and schedule 80 part company above NPS 8.
This table runs from NPS 1/8 to NPS 24 and stops there. ASME B36.10M itself continues to NPS 80; those larger sizes are not carried here, so a size above NPS 24 is missing rather than undefined.
Dimensions are as defined by ASME B36.10M (welded and seamless wrought steel pipe). This site is an independent reference and is not affiliated with, endorsed by or approved by any standards body.
Every value on this page was cross-checked against 5 independent published sources:
Nearby sizes